Friday, October 09, 2015

Getting Pool Supplies Oklahoma City

By Della Monroe


Maintenance of a pool involves much more than just addition of chlorine and other cleaning agents. Appropriate amounts of pool additives and cleaning agents are essentials for crystal clear and clean water. Pool supplies Oklahoma City are meant to regulate the alkalinity and pH level of the water to inhibit growth of microorganisms.

One of the most popular swimming pools chemical is chlorine. It is used as a sanitizer even in Jacuzzis. Its effective ability in elimination of microbes from the water is accomplished through its penetration into the cell walls of the particular microorganism causing dissolution of their composition. In addition, the compound is used in stain removal and laundry bleaching.

When you dissolve chlorine in water, two compounds are produced. The initial one is hypochlorous acid and also ions of hypochlorite. These are the substances behind the disinfection properties of chlorine. The target is the cell characteristics and also the enzymes which facilitate cell functions to keep the microbes alive. The compounds therefore make it impossible for the microorganism to survive in the water but the family can use the pool.

As much as chlorine is important in keeping the pool clean it can also be a cause for problems when not used correctly. If it is excess, the eyes and the skin of a person who comes into contact with that water will be irritated. Inhalation of chemicals causes irritation to lungs which in turn results to dyspnea. To avoid such situation, its necessary to maintain a balanced and safe chlorine level in pools. The pH should not be less than 7.2 or higher than 7.8. There are test strips sold in the market for testing the pH level of pool water.

Besides chlorine, bromine is another crucial pool supply. It is also a water purifier. It keeps debris off and also contaminants. You have two options when using bromine. You can either purchase the strips or its granules. The granules become active immediately after dissolving in water. You have to sprinkle them in the pool. However, the strips just have to be attached to floaters, skimmers and chemical feeders.

Bromine is the recommended supply for use by those who have developed chlorine sensitivity. There is no big difference from the way these to chemicals act. However, bromine is preferred because it does not cause irritation witnessed commonly with the use of chlorine.

Soda ash or baking soda are the best supplies to use in adjustment of swimming pool water alkalinity. They are common kitchen supplies. Baking soda is used when there is a need to increase the total alkaline levels of water while soda ash is used in raising the pH level. These are products which are readily available in the market and it is not difficult to get them.

If the alkalinity and pH level is kept balanced, problems encounter in pool maintenance will be kept at bay. If the alkaline levels go low, the pH will either be too high or low. The pool will not be safe for human use. In addition, this causes chlorine inefficiency, metal corrosion and staining. On the other hand, high alkaline levels make the water cloudy and its circulation rate is reduced. Additionally, clogged filters are witnessed.




About the Author:



No comments:

Post a Comment